ITT Controls


Drager ITT

Drager ITT Solenoid Valves 2-Way

Drager ITT 2-Way Solenoid Valves are made of highly versatile stainless steel and have a general purpose for pressures up to 1050 psi. Ideally suited for laundry, and dry-cleaning machines, welding equipment, petroleum industry, flame cutting, etc.

Drager ITT Solenoid Valves 3-Way

The workhorse of the Drager ITT Valve is the 3-way valve family. Capable of handling much higher pressures and flow capacities than its sister valves. It can be mounted in any position with bubble tight shut-off. The Drager ITT 3-way valves are available

Drager ITT Special Purpose Valves

Drager ITT Special Purpose Valves are shock and vibration resistant. The PV1C magnetic valves have been engineered to function under the rugged operating conditions of the road. Acceleration: 25G's. Especially designed to handle either gasoline or

Drager ITT Combustion Controls

Drager ITT offers a various range of combustion controls for different types of configurations. For instance all types of gas-fired heating equipment, warm air furnaces, boilers, industrial burners, and unit heaters in domestic and commercial installations.

Drager ITT Linear and Rotary Actuators

Drager ITT DL64/DL66 series are powerful, electric linear actuators developed for converting manually actuated equipment to remote manual control or to automatic on-of, floating, or proportional control. Versatile mounting of the actuator permits

Drager ITT Thermopilot

Drager ITT has safe lightning electrical contacting devices which provide automatic safety shut-off of main line automatic gas valves. Different types of models for remote mounting or manual reset plug-in type with four prong connector for direct

Drager ITT Various Models

Drager ITT has many valve product types and accesiores. ITT Controls can deliver all of these types for different purposes. Some of these products that ITT Controls can provide are:AM10 Automatic pilot spark

Drager ITT Shutoff Gas Valves

Drager ITT Safety Shutoff Gas Valves come in different types. K3A4&5 series two-way, normally closed, direct-operated solenoid gas valves provide on-off control of fuel gas flow in commercial and industrial combustion equipment applications.

Drager ITT Gas Vent Valves

Drager ITT Gas Vent Valves come in different models. S262 Vent Valve - Normally-open, two wayThe Drager ITT S262 Vent Valves are pilot operated, diaphragm-type solenoid valves suitable for most venting applications, including

Drager ITT Oil - Steam - Liquid Valves

Drager ITT Oil/Steam/Liquid Safety Shutoff Valves come in different types and models. ITT Controls can advise and deliver you the right product for your specific situation. HOV1 Safety Shutoff Valves, Normally ClosedThe HOV1

Drager ITT Combustion Valves

The ITT General Solenoid valves are designed to control the flow of fuel gases in industrial and commercial gas burner systems. The valves are suitable for main line, pilot line and venting applications. Burner construction valves are designed to

Drager ITT Hydramotor AH4 / V710

Hydramotor Gas Valves are with or without valve seal overtravel interlock (FM Proof of closure). For on-off main line gas control. Slow or fast opening models with spring return shutoff of less than one second for boilers, furnaces, ovens and

Drager ITT Hydramotor Gas Valve AH8 / V710

The Hydramotor Gas Valve AH8 / V710 is a proportioning control with low fire positioning. It is a line voltage actuator which permits limit and safety controls to be wired directly into line voltage power circuit. The Hydramotor AH8 provides adjustable

Drager ITT Hydramotor Gas Valve AH14 / V710

The Hydramotor AH14 / V710 actuator has a separate on-off and is electro-hydraulic. It is for use in conjunction with safety shut-off valves in semi-automatic gas-fired single burner, boiler and furnace applications. These valves consists primarily

Drager ITT Hydramotor S107372 Actuator Replacement Kit

The Hydramotor S107372 Actuator Replacement Kit for HO Hydramotor Gas Valves is designed for use with HO Series Hydramotor Gas Valve bodies. It allows interchangeabillity of actuators without removing the existing HP valve body from the line. Consists

Drager ITT Hydramotor Gas Valves H117

The Hydramotor H117 Fuel Gas Valve is a normally closed coombination of Hydramotor actuator and safety shutoff/control gas valve. It Is used for commercial and industrial burners in applications such as furnaces, dryers, dehydrators, conversion burners

Drager ITT Hydramotor Gas Valves H118

The General Controls Hydramotor H118 Fuel Gas Valve is a normally closed coombination of Hydramotor actuator and safety shutoff/control gas valve. It Is used for commercial and industrial burners in applications such as furnaces, dryers, dehydrators,

Drager ITT Hydramotor Fuel Gas Valves H137

The Hydramotor H137 Fuel Gas Valve is a two-way, normally closed, safety shutoff valve providing trouble free, electrohydraulic, on-off control of combustion gas for boilers, industrial furnaces, dryers, dehydrators, large conversion burners, air

Drager ITT Hydramotor HV11, HV12, HV15 and HV62

The Hydramotor HV11 Shutoff Valve is a 2-way, normally closed valve with a bronze body. The HV11 series is suitable for water, oil, gas and steam. It is an electrohydraulic linear actuator and has an extended iron cast. The Hydramotor HV12

Drager ITT Hydramotor H30/H35

The Hydramotor H30/H35 are electrohydraulic, linear actuators. They feature a completely self-contained, sealed, hydraulic motor/pump power unit coupled to a hydraulic cylinder container both piston/shaft assembly and return spring.The positive,

Drager ITT Hydramotor Actuator H10 / H25

The Hydramotor Actuator H10 /H25 is a fail-safe electrohydraulic linear actuator. They feature a completely seld-contained, sealed, hydraulic motor/pump power unit coupled to a hydraulic cylinder containing both the piston/shaft assembly and return-spring.The

Drager ITT Hydramotor Actuator H11

The Hydramotor Actuator H11 is a two position, spring-return, pull-type shaft that retracts on application of power and spring-returns on loss of power.The Hydramotor H11 serie is the result of over 50 years of experience in designing, testing,

Drager ITT Hydramotor Actuator H24

The Hydramotor H24 serie is a two-postion, lock-in-last Position, pull-type. The shaft retracts on application of power; lock-in-last position on power failure, spring-return when relief valve is energized. Normally-closed relief valve wired independently

Drager ITT Hydramotor H113 Series

The patent pending design of the Hydramotor incorporates a single aluminum body containing two distinct shutoff valves and one new watertight Hydramotor actuator. An optional and patent pending Posi-Prove system dynamically tests valve seal tightness

Drager ITT Hydramotor H12, H15 and H62

The Hydramotor H11 Shutoff Valve is a 2-way, normally closed valve with a bronze body. The H11 series is suitable for water, oil, gas and steam. It is an electrohydraulic linear actuator and has an extended iron cast.The Hydramotor H12 Shutoff

Drager ITT Hydramotor AH90 / NH90

The AH90 / AH-90 and NH90 / NH-90 Hydramotors series are electro-hydraulic actuators. The actuators are widely used in nuclear power plant systems. They provide critical safety functions such as valve and damper operation. The Hydramotor AH90 / NH90

ITT Drager Electro Hydraulic Motors

ITT Controls also provides universal throttle motors made by ITT Drager. ITT Controls also delivers the replacement equipment of these models. This electro-hydraulic motors are out of production but are still available via ITT Controls.This electro-hydraulic